Can A Camera Link Full Frame Grabber Use Camera Link Medium

Frame Grabbers

CoaXPress and Camera Link Acquisition Cards

Active Silicon designs and manufactures a wide range of frame grabbers based around leading-edge hardware technology. The range includes acquisition solutions for CoaXPress and Camera Link in different grade-factors. Operating system support includes 64-fleck versions of Windows, Linux and QNX.

Our high-speed, real-time FireBird CoaXPress and Camera Link frame grabbers are fully GenICam compliant. They support GPU processing and are compatible with both AMD'southward DirectGMA and NVIDIA's GPUDirect for Video.

The ActiveSDK software development kit provides comprehensive example applications and optimized libraries. Camera and frame grabber control is delivered by our GenICam compliant front end-cease software ActiveCapture.

FireBird Photographic camera Link Frame Grabber (2xCLD-2PE8)

Part Number: AS-FBD-2XCLD-2PE8

The FireBird Camera Link Dual 80-bit (Deca) is an eight lane (x8) Gen2 PCI Express board for simultaneous capture from 2 Photographic camera Link cameras, which could be two Medium, two Total or 2 eighty-bit cameras (including PoCL). Designed for ultimate functioning it provides the very fastest image acquisition without CPU intervention.

FireBird Photographic camera Link Frame Grabber (1xCLD-2PE4L)

Part Number: Equally-FBD-1XCLD-2PE4L

FireBird Camera Link 80-bit Low Profile is a cost-effective and fast four lane (x4) Gen2 PCI Express lath for capture from two Base cameras or a unmarried Base of operations, Medium, Total or 80-chip Camera Link camera (including PoCL). The low profile blueprint allows this board to be used in small embedded PC enclosures and rackmount cases where the total height PC cards are not suitable.

Phoenix PCI/104e Photographic camera Link Frame Grabber

Office Number: Equally-PHX-D48CL-104PE1

The Phoenix-D48CL PCI/104e is an industrial embedded form cistron board for capture from a unmarried Base, dual Base or Medium Camera Link cameras. It uses the PCI Limited extension to the well established PCI/104-Plus standard and thus offers the flexibility of the Photographic camera Link interface in a truly embedded and rugged grade factor. Supports PoCL and SafePower.

Phoenix PC/104-Plus Camera Link Frame Grabber

Part Number: As-PHX-D24CL-PC104P32

The Phoenix D24CL PC/104-Plus is an embedded form gene lath for paradigm acquisition in industrial applications. It captures from a single Base Camera Link camera. This board uses the PCI extension to the well-established PCI/104-Plus standard and thus offers the flexibility of the Camera Link interface in a truly embedded and rugged form-factor.

Phoenix 3U cPCI Camera Link Frame Grabber

Part Number: Equally-PHX-D48CL-3CPCI32-B-CR

The Phoenix-D48CL 3U cPCI is a high-end 32-flake/66 MHz cPCI form-factor board for industrial embedded applications for capture from Base, dual Base of operations or Medium Camera Link cameras. The board features rear panel I/O and is available as a conduction cooled lath for enervating applications. CompactPCI is typically used in industrial, aerospace and other embedded systems.

Phoenix Photographic camera Link Frame Grabber (D48-PE4H)

Part Number: Every bit-PHX-D48CL-PE4H

Phoenix-D48CL x4 is a PCI Limited board for the acquisition of digital data from a diversity of Camera Link sources, including digital frame capture and line scan cameras. It supports all the formats of the Base and Medium configurations, i.e. unmarried viii- to 16-bit information, through 12-bit RGB, to four tap 12-bit sources, likewise as dual Base configuration.

Source: https://www.activesilicon.com/products/frame-grabbers/?fwp_camera_interface=camera-link

Posted by: martinhaddince.blogspot.com